Every SKU below is a real piece of iron sitting in a real yard right now. Click any line to see condition photos, last-inspection date, and which yard it's parked in. Add it to a quote, or call the counter to lock it.
Triplex mud pumps for drilling, centrifugal trash pumps for water transfer, downhole rod pumps for stripper wells, jet pumps and submersibles. Every unit field-tested before it leaves the gate.
Most-rented in Q2: triplex mud pumps for completions and 6×8 trash pumps for water moves.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| PMP-TRP-336 | Triplex Mud Pump · 336 HHP 5″ plunger · 120 spm · Tier 4F drive · skidded | $2,850 /wk | 8 ready |
| PMP-TRP-700 | Triplex Mud Pump · 700 HHP 6.5″ plunger · 180 spm · trailer-mounted | $5,400 /wk | 2 left |
| PMP-TRP-1600 | Triplex Mud Pump · 1,600 HHP 7.5″ plunger · 195 spm · skid · for offset completions | $9,800 /wk | Out / 14d |
| PMP-CEN-6X8 | Centrifugal Trash Pump · 6×8 2,400 gpm · 140 ft head · diesel · self-priming | $725 /wk | 6 ready |
| PMP-CEN-4X6 | Centrifugal Pump · 4×6 1,400 gpm · 110 ft head · trailered | $485 /wk | 11 ready |
| PMP-JET-S2 | Jet Pump · S2 surface unit For artificial lift in shallow heavy-oil wells · 5K psi | $2,200 /wk | 4 ready |
Gate, ball, check, plug, butterfly. ANSI 150# through 2,500#. Surface flow, manifold service, wellhead trim, choke-line. WCB and stainless bodies, 13Cr trim where the H2S calls for it.
If you can hand-spec it, we can pull it off the rack today.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| VLV-GATE-6-900 | Gate Valve · 6″ · 900# WCB body · 13Cr trim · 2,160 psi WP · API 6D | $285 /wk | 14 ready |
| VLV-GATE-4-600 | Gate Valve · 4″ · 600# WCB body · standard trim · 1,440 psi WP | $210 /wk | 22 ready |
| VLV-BALL-3-600 | Ball Valve · 3″ · 600# trunnion Fire-safe · API 6D · flanged RTJ ends | $165 /wk | 18 ready |
| VLV-CHK-4-600 | Swing Check Valve · 4″ · 600# WCB body · 13Cr trim · 1,440 psi WP | $165 /wk | 9 ready |
| VLV-PLUG-2-1500 | Plug Valve · 2″ · 1,500# For choke manifold service · 3,600 psi WP | $240 /wk | 3 left |
| VLV-BFLY-12-150 | Butterfly Valve · 12″ · 150# For water-transfer manifolds · lug body | $95 /wk | 28 ready |
That covers Bakersfield, Taft, Coalinga, Lost Hills, and the entire Kern River, Round Mountain, Belridge, Cymric, Lost Hills, Buena Vista, and Coalinga fields. Beyond 60 mi we quote freight same-day on contract carriers. Typical add is $1.85–$2.40/mi for standard loads, more for over-size or HazMat permits.
Production tubing in J-55 and L-80, casing through 13-3/8″ in BTC and premium connections, drill pipe in S-135, line pipe in API 5L Grade B and X42. Inspected, drift-tested, and tagged before it leaves the rack.
R-2 and R-3 lengths in stock. Custom-cut available on 24-hour turnaround.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| TBG-2-7-8-J55 | Tubing · 2-7/8″ EUE · J-55 6.5 lb/ft · R-2 / R-3 · drift tested · API 5CT | $18 /jt·wk | 240 jts |
| TBG-3-1-2-L80 | Tubing · 3-1/2″ EUE · L-80 9.3 lb/ft · R-2 · sour service · 13Cr available | $26 /jt·wk | 180 jts |
| CSG-9-58-L80 | Casing · 9-5/8″ · L-80 BTC 40 lb/ft · R-3 · drift tested · field-ready | $42 /jt·wk | 180 jts |
| CSG-13-38-P110 | Casing · 13-3/8″ · P-110 BTC 72 lb/ft · R-3 · for surface casing strings | $78 /jt·wk | 42 jts |
| DRL-4-1-2-S135 | Drill Pipe · 4-1/2″ · S-135 16.6 lb/ft · NC50 connection · class 2 inspection | $58 /jt·wk | 320 jts |
| LP-8-X42 | Line Pipe · 8″ · API 5L X42 Sch 40 · for flowlines & injection lines | $15 /jt·wk | 510 jts |
Annular and ram-type BOPs from 7-1/16″ through 21-1/4″ bore. 3K, 5K, and 10K WP. API 16A spec. Choke manifolds, accumulator units, and full BOP stacks rented as packages or piece-wise.
Every BOP comes with current certs, pressure-test docs, and a tagged condition record. Inspection-due dates plotted on every ticket.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| BOP-7-116-3K | Annular BOP · 7-1/16″ · 3K WP API 16A · standard packer · recent recert | $1,950 /wk | 5 ready |
| BOP-11-3K | Annular BOP · 11″ · 3K WP API 16A · standard service · cert valid through Q4 | $2,800 /wk | 4 ready |
| BOP-13-58-5K | Annular BOP · 13-5/8″ · 5K WP API 16A · 5,000 psi WP · with packer kit | $4,200 /wk | 2 left |
| BOP-RAM-11-5K | Double Ram BOP · 11″ · 5K Pipe + blind rams · API 16A · with ram kits | $5,400 /wk | Out / 7d |
| CHK-3-15-5K | Choke Manifold · 3-1/16″ · 5K WP Adjustable choke · gauges · skidded · full kit | $2,650 /wk | 3 ready |
| ACC-80GAL-5K | BOP Accumulator · 80-gal · 5K Koomey unit · electric & pneumatic pumps | $1,400 /wk | 4 ready |
500-bbl frac tanks (sealed top and open top), insulated tanks for heated service, gun-barrel tanks for gravity separation, mix tanks, and separators. DOT-406 spec on all liquid-haul tanks.
Delivered to pad with trailer drop. Pickup on a fixed schedule. Cleaning quoted per condition on return.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| FRAC-500BBL | 500-bbl Frac Tank · Sealed top 21,000 gal · DOT-406 · 20″ man-hatch · sloped floor | $525 /wk | 22 ready |
| FRAC-21K-INS | 21K-gal Insulated Frac Tank 4″ R-25 insulation · opt heated coil · for cold-weather sets | $650 /wk | 11 ready |
| FRAC-OPEN-500 | 500-bbl Open-top Frac Tank For water-only service · easy clean · 5-bbl mark | $425 /wk | 30 ready |
| TANK-GB-300 | Gun-Barrel Tank · 300-bbl For gravity sep of oil/water · weir + drain ports | $485 /wk | 4 left |
| MIX-100BBL | Mix Tank · 100-bbl · agitated 3 hp electric agitator · paddle · for completions chemicals | $385 /wk | 8 ready |
| SEP-2P-50K | 2-Phase Separator · 50K psi MAWP Skidded · with relief train · for testing | $1,950 /wk | 6 ready |
4- and 6-bulb LED towers, diesel and dual-fuel. 30-ft hydraulic mast standard. Solar-hybrid models for sites with idle restrictions. Trailerable, plug-and-light on arrival.
Average runtime on a 30-gal tank is 65 hours at full output.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| LT-MQ4-LED | 4-Bulb LED Tower · Diesel 4 × 350W LEDs · 30-ft mast · 65 hr / fuel | $195 /wk | 18 ready |
| LT-MQ6-LED | 6-Bulb LED Tower · Diesel 6 × 350W LEDs · 30-ft hyd mast · 30-gal tank | $245 /wk | 12 ready |
| LT-MQ6-SOL | 6-Bulb LED Tower · Solar-hybrid Solar + diesel · <1 hr/day genset runtime · for low-noise sites | $345 /wk | 3 left |
| LT-VBLT-LED | Vertical Mast Tower · 35-ft Wind-rated 60 mph · plug-and-light | $215 /wk | 9 ready |
25 kW to 500 kW. Tier 4 Final diesel. Sound-attenuated enclosures for residential-adjacent pads. Distribution boxes, cable sets, and shore-power hookups included on request.
Fuel polishing and weekly service available on long-term sets.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| GEN-45-T4F | 45 kW Diesel Gen · Tier 4F Sound-att · 24-gal tank · 480/240V switch | $385 /wk | 14 ready |
| GEN-100-T4F | 100 kW Diesel Gen · Tier 4F Sound-att · 150-gal tank · 480V 3-ph | $685 /wk | 9 ready |
| GEN-225-T4F | 225 kW Diesel Gen · Tier 4F 67 dB(A) @ 7m · 250-gal tank · trailered | $1,180 /wk | 3 left |
| GEN-500-T4F | 500 kW Diesel Gen · Tier 4F Sound-att · 500-gal tank · 480/600V · prime-power rated | $2,650 /wk | 4 ready |
Power tongs, slips, elevators, tubing testers, torque tools, pressure washers, compressors, hoses, fittings, and all the small parts that don't have their own catalog category but always get pulled.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| TLS-PTG-5-12 | Power Tong · 5-1/2″ – 12-3/4″ 5,000 ft-lb · hydraulic · with backup tong | $540 /wk | 7 ready |
| TLS-SLP-2-7-8 | Tubing Slips · 2-7/8″ Hinged · for workover service | $65 /wk | 22 ready |
| TLS-TBT-15K | Tubing Tester · 15K psi For pressure-testing tubing joints · with hand pump | $185 /wk | 5 ready |
| TLS-CMP-185 | Air Compressor · 185 cfm · towable Diesel · 100 psi · for service-rig air | $295 /wk | 11 ready |
H2S monitors, SCBAs, fall arrest, gas detection, eyewash stations, fire extinguishers, FRC, signage, and barricades. Calibrated and certified on every check-out.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| SAF-H2S-4GAS | 4-Gas H2S Monitor · personal H2S / O2 / CO / LEL · calibrated · 12-mo bump | $45 /wk | 40 ready |
| SAF-SCBA-45M | SCBA · 45-min · NIOSH/NFPA With harness · spare cyl · annual fit-test current | $95 /wk | 16 ready |
| SAF-AREA-H2S | Area H2S Monitor · w/ horn + strobe 5-channel · 50-ft radius · tripod or magnet mount | $85 /wk | 22 ready |
| SAF-EW-PORT | Portable Eyewash Station · 16 gal ANSI Z358 · for completions pad setup | $48 /wk | 14 ready |
Wireline lubricators, pack-offs, tool strings, rope sockets, swab cups, sucker rods, polished rods, pony rods, sinker bars. Everything between the surface and the pump.
| SKU | Description | Rate | Avail |
|---|---|---|---|
| WL-LUB-5K-20 | Wireline Lubricator · 5K · 20 ft 2″ ID · API 6A · with pack-off and grease injector | $485 /wk | 6 ready |
| WL-PKOFF-5K | Pack-off · 5K WP · stuffing box For slick-line · with grease nipple | $165 /wk | 9 ready |
| WL-SR-7-8-D | Sucker Rod · 7/8″ · Grade D API 11B · 25-ft · with pony rod set | $8 /jt·wk | 620 jts |
| WL-PR-1-5-D | Polished Rod · 1-1/2″ · 36 ft Chrome-plated · spray-metalized finish | $35 /wk | 48 ready |
Phone, email, or trade account portal. If you're not sure what you need. Call Walt at the counter. He's been pulling parts since he was 11. He'll figure it out with you.
About this design template
This is a design template that shows how Albertson Designs approaches oil & gas websites. The structure, photography, typography, and copy were built around how a real oil & gas business actually operates. Generic about-services-contact patterns are not here.
When Albertson Designs builds your site, we use designs like this as a reference for color, structure, and category vocabulary. Every line of code, every photo, and every word is custom for your business. Most full builds ship in four to eight weeks depending on scope.
Book a free consultation